Home Page

Scratch Removal Disc (SRD)

In one easy step, this unique disc removes scratches from foot traffic and completely prepares your marble, granite, terrazzo and concrete surfaces for polishing. this step replaces diamond grits 400-1600. SRD's cut like a 400 grit, but leave the surface as smooth as a 1600 grit would, thus preparing the surface for polishing.

Available Size: 3 pack 5 pack Product Code: SRD3 SRD5

---

Available Size: 17" 3 series 17" 5 series 19" 3 series Product Code: FDH17-3 FDH17-5 FDH19-3

---

Available Size: 17" 19" Product Code: RDH17 RDH19

---

Apeiron offers several stone care solutions that will restore and maintain the brilliance of your stone flooring.

STEP 1

Scratch Removal Discs (SRD's) remove scratches in heavy traffic areas. They should be used when needed to repair scratches from foot traffic.

• Unique blend of metals and minerals
• Grit covers 400 - 1,600
• 3 steps of Diamonds in 1
• Coverage range is 700 - 3,000 sq ft depending on stone type
• Set of 3 or 5 can be used depending on hardness of stone.

Foam Disc Holder

• A must to hold our SRD's
• Low cost of entry vs an expensive pad drive and machine
• 17" 3 series
• 17" 5 series
• 19" 5 series

STEP 2

Wet or Dry polish restores gloss to heavy traffic areas when Marble Shake no longer gives the desired gloss. It can be used annually or as needed.

• 1 oz powder to 4 oz. water for 20 sq ft.
• Buff for 30 seconds per sq ft or 10 minutes with a white or light hair pad.
• Use a wet vac and damp mop for rinsing.

Wet Polish: a traditional technique that uses a unique abrasive to achieve a unique result.

• Apply 1 oz of powder to the floor
• Add 4 oz of water, this will cover 16-20 sq. ft.
• Buff with a standard white polishing pad for 30 seconds per sq ft.
• Keep mixture wet, do not allow to dry back
• Wet vac and rinse with Stone Wash
No steel wool needed
No strong odors
Not Hazardous
Virtually goof proof as compared to traditional Oxalic Acids
No polymer build up
No discoloring
Low end use cost per sq ft.
Best product for Terrazzo Limestone and Concrete
3 kg case (6-500 gram cans)

Dry Polish - uses a unique abrasive to achieve a unique result.

• Mix 1 oz of powder and 5 oz of water in a cup
• Put 1 oz of mixture on the floor
• Buff to dry (do not add water) - repeat for higher gloss
Same benefits as Wet - PLUS
No wet vac, no noise
Low customer impact
Less labor
Less mess
Professionals prefer this product as a long-term strategy to save time
3 kg case (6 / 500 gram can)

Marble Shake

Marble Shake maintains gloss in heavy traffic areas. It is to be used quarterly or as needed in heavy traffic areas only. Apply 1 oz. and buff to dry with a white or light hair pad to repair light traffic and restore gloss.

• It is a liquid that contains abrasives
• Must shake prior to each use
• Standard white polishing pad
• ¼ oz for 10-12 sq ft
• Buff to dry
• Extends the time between using the polishing powders and SRD's
• Very low end use price
• No steel wool pads needed
• No wet vac needed
• Very easy to use
• Removes IE (initial etching) from powder dry back
• High turn item

Granite Polishing Powder - patented technology with very unique abrasive

1. 1 oz powder, 1 oz water, buff 10 - 12 sq. ft. to dry
2. Continue till desired result is achieved
3. Dust mop or dry vac residue

• Mechanical action only - no chemical reaction involved
• 1 neutral powder for all colors of granite, even black
• No polymers
• No build up
• No discoloring
• No extra weight required
• Unmatched in the industry

Granite Shake

• Liquid that contains abrasive
• Must shake prior to each use
• Standard white polishing pad
• ¼ oz for 10-12 sq ft
• Buff to dry
• Extends the time between using the polishing powders and SRD's
• Very low end use price
• No steel wool pads
• No wet vac
• No polymer build up
• No discoloring
• Very easy to use
• Turn over product

After polishing you can clearly see the scratches are removed and the natural gloss is restored!

* Aperion recommends our water-based stone impregnator to protect stone flooring from staining.