Restoration Process
CERAMIC AND GROUT
Ceramic Kit
Step 1 Alky-14 to Deep Clean & Remove Existing Coatings:
Alky-14 will remove grease, oil, traditional seals & finishes from the tile and grout. In order for Step 2 to be effective all coatings must be removed. Repeat this step if necessary.
Step 2 Grout Blast to Restore Grout & Enhance Slip Resistance :
Grout Blast is designed to further remove challenging soils from the grout line. This will restore the grout line to a like new condition. If shiny spots remain it is likely to be seal or finish that has not been removed during Step 1, try scrapping those areas with a knife or repeat Step 1.
Step 3 Impregnator Seal to Protect & Resist Staining:
Impregnator Seal can be applied by using a mop and bucket or pump up sprayer. Seal should be focused into the grout lines as much as possible. Residue can be buffed off with a low speed machine and white pad.
Click here for a pdf version of these instructions
Daily Clean with Apeiron's OXY-TG
OXY-TG is fortified with Hydrogen Peroxide technology that will promote cleaner, brighter grout lines. OXY-TG is an excellent cleaner for every day use that is environmentally friendly. Mix 1:64 (2 oz. per gal.) into mop bucket or auto scrubber.
Rotary Brush
Used under a low speed floor machine for deep cleaning of tile and grout.
Available Size: 17" Rotary Grout Brush
Product Code: 813317
Available Size: 19" Rotary Grout Brush
Product Code: 813319
Available Size: 6 qt./ case
Product Code: ALKCS
Available Size: 6 qt./ case
Product Code: GBSC
Available Size: 6 qt./ case
Product Code: ISQTCS
Available Size: 12 Qt. per Case / 6 Qt. per Case
Product Code: OXYCS / OXYCS6
Triangle Brush
The perfect brush to be used by hand or with a screw-in handle to manually scrub grout lines and hard to reach areas.
Available Size: 1 each
Product Code: 41323-09